ArtCote 1:1 EPOXY RESIN

An easy to measure 1:1 ratio self-leveling product, with excellent air release properties, is UV Stable, low in VOC’s and in odour.

This product has been designed to add a diamond-like finish to your resin art, acrylic pours, mosaics, photographs, prints, timber surfaces, sculptures, and more. Can be applied by pouring, brushing on, or with a roller to substrates such as Art Boards, MDF, acrylic sheet, concrete, metal, wood and more.

ArtCote can be used as a top coat on your artistic projects, and can also be tinted with JustResin Pigment Pastes, Powders, Glitters and Inks.

ArtCote is a Premium Epoxy Resin System, formulated for Artists, by Artists. 

• Measure equal parts by volume (eg, 3oz / 100mls : 3oz / 100mls)
• Mix for 3 minutes, or until combined, scraping sides and bottom of vessel
• Open time of approx. 60mins at 25 degrees Celsius
• 24 hour cure time
• Full cure at 7 days
• Heat Resistant up to 50 degrees Celsius (may be higher, still in testing)
• A 0.26 gal / 1L kit includes 16.9oz of Part A and 16.9oz of Part B